My Cart

Nissan - Auxiliary Adapter Kit

Auxiliary Input Converter

Auxiliary Input Converter
Plug and play installation
3.5mm audio phone jack
Quality sound with direct connection

In stock
£79.99
-- OR --

Description:

Grom Audio's simple and low cost aux-input kit will allow a direct sound connection to ensure excellent sound quality.

Aux 3.5mm car audio input: Just plug the device into the extension port or CD changer port of your stereo, connect it to your favourite MP3 player, iPod, iPhone, or Android device and hear the CD quality music right away!

Data Cable:

Each Grom Audio kit comes with one vehicle specific cable (Data cable) for connection between the Grom interface and the CDC port on the rear of the head unit.

Only some Nissan head units have a CD changer port, please make sure you have a compatible head unit or preferably check if the 12 pin port is present.

Downloads:

Kit Contents:

  • Car stereo adapter in plastic enclosure
  • 1.5m cable with 3.5mm male jack
  • Vehicle specific cable #NIS02
  • User manual 
     

Optional accessories and upgrades - sold separately:

  • Flush Mount 3.5mm female auxiliary cable (CFM35)
  • High power USB socket car charger (UGC257)


Please note:  With a simple aux-input into the car stereo no control over the music playing is available via the radio/steering wheel buttons.  Please see our other kits that will allow this functionality.

Nissan vehicle compatibility is based on your head unit and not the Nissan car model!

Nissan radio compatibility

Above head units may be found in the following vehicles:

  • Nissan 350Z 2003 onwards
  • Nissan Almera 1995 onwards
  • Nissan Almera Tino 2000 onwards
  • Nissan Murano 2005 onwards
  • Nissan Navara 2007 onwards
  • Nissan Note 2006 onwards
  • Nissan Pathfinder 2005 onwards
  • Nissan Patrol 2008 onwards
  • Nissan Primera 1995 onwards (Not Compatible with Nissan Primera 2001 with Blaupunkt Tape head unit)
  • Nissan Qashqai 2007 onwards
  • Nissan Qashqai 2 2008 onwards
  • Nissan Xtrail 2001 onwards with or without navigation
  • Nissan Navara 2004 onwards

Unsure? Download the full vehicle application guide or contact us first.

Step 1 - remove the factory head unit (see FAQ's or video clips for further help)
Step 2 - connect the Data Cable (Vehicle Specific Cable) into the typically empty CD changer port on the rear of the unit. 
Step 3 - plug the other end of the data cable into the Grom interface which is small enough to leave behind the stereo or ideally route into the glove box.
Step 4 - Install head unit and enjoy!

  • No fuss, easy DIY plug-and-play installation
  • No wiring needs to be cut or soldered.
  • The installation of this kit should not affect your vehicles warranty.
  • 0.5m Data cable (vehicle specific cable)

Write Your Own Review
You're reviewing:Nissan - Auxiliary Adapter Kit