My Cart

Subaru - Auxiliary Adapter Kit

Auxiliary Input Converter

Auxiliary Input Converter
Plug and play installation
3.5mm audio phone jack
Quality sound with direct connection

In stock
£79.99
-- OR --

Description:

GROM Audio's simple and low cost aux-input kit will allow a direct sound connection to ensure excellent sound quality.

Aux 3.5mm car audio input: Just plug the device into the extension port or CD changer port of your stereo, connect it to your favourite MP3 player, iPod, iPhone, or Android device and hear the CD quality music right away!

Data Cable:

Each Grom Audio kit comes with one vehicle specific cable (Data cable) for connection between the Grom interface and the CDC port on the rear of the head unit.

The 20 pin SUB08 data cable connects to the CD changer port on the back of select Subaru radios (please make sure your model is on the list or check it has the port)

Downloads:

Kit Contents:

  • Car stereo adapter in plastic enclosure
  • 1.5m cable with 3.5mm male jack
  • Vehicle specific cable #SUB08
  • User manual 
     

Optional accessories and upgrades - sold separately:

  • Flush Mount 3.5mm female auxiliary cable (CFM35)
  • High power USB socket car charger (UGC257)


Please note:  With a simple aux-input into the car stereo no control over the music playing is available via the radio/steering wheel buttons.  Please see our other kits that will allow this functionality.

Head unit must be CD changer capable

Compatible head unit models include: 

GX-806EF2, GX-201JE, GX-201LE, GX-201RE, GX-201LH, GX-201RH, GX-203JE, GX-204LE, GX-204RE, P-206 UNB,
Kenwood FZDA07EREF2, (CZ34106 - contact us)

Can be found in the following vehicles:

  • Subaru Impreza 2004-2010
  • Subaru Forester 2004-2010
  • Subaru Legacy 2004-2010
  • Subaru Outback 2004-2010
  • Subaru Tribeca 2004-2010

Please check if CDC port is present on rear of head unit. Other units may be compatible, please contact us!

Some Sat Nav systems may not be compatible, please contact us if unsure.

Model FXDD07EF2 is not compatible

Unsure? Download the full vehicle application guide

Step 1 - remove the factory head unit (see FAQ's or video clips for further help)
Step 2 - connect the Data Cable (Vehicle Specific Cable) into the typically empty CD changer port on the rear of the unit. 
Step 3 - plug the other end of the data cable into the Grom interface which is small enough to leave behind the stereo or ideally route into the glove box.
Step 4 - Install head unit and enjoy!

  • No fuss, easy DIY plug-and-play installation
  • No wiring needs to be cut or soldered.
  • The installation of this kit should not affect your vehicles warranty.
  • 0.5m Data cable (vehicle specific cable)

Write Your Own Review
You're reviewing:Subaru - Auxiliary Adapter Kit